Default username and password for failsafe account for Summit X450e-48p

[EtherNation_Use]

Create Date: Sep 19 2012 5:45AM

Hi,

Can anybody tell us default username and password for failsafe account for Summit X450e-48p Network Switch and how to login into this account.

Thanks, (from Rajesh_Panchal)

[EtherNation_Use]

Create Date: Oct 9 2012 8:04PM

1. Load to BootROM && type "config none" && "reboot" you will boot with default config
2. After all of this you can configure mgmt ip (DON'T SAVE CONFIG!!!!) && ls (there is your config with lost pass) && upload this congig to your tftp server
3. Open your config (xml mode, such as primary.cfg) in text editor find accounts tag and add line

adminVy730g$JV85BzeGoe1CBmX87ef0b011

this will add default admin account to your config (login:admin pass: 'enter(none)), save file and load to switch

4. use configuration 'name' && reboot
5. correct your accounts and politics

ENJOY (from pacan4ik1_pacan4ik1)

[EtherNation_Use]

Create Date: Sep 28 2012 10:57PM

Hey harpThere is no default fail safe account. TAC should be able to get you back in if you have a pc connected to the serial port and have it on a network for them to control.Other than that you have to factory default the switch and use admin with no password.You can configure a fail safe account using the configure failsafe command.Good luckP (from Paul_Russo)