cancel
Showing results for 
Search instead for 
Did you mean: 

Downloading to SwitchError: Failed to download image - tftp: timeout

Downloading to SwitchError: Failed to download image - tftp: timeout

Hermes_Medina
New Contributor
Hello, Good morning.

If I have connectivity between the switch and tftp server(tftp32), why I get that message? what Im doing wrong?
23 REPLIES 23

Alexandr_P
Valued Contributor
1. Can you try to use another PC with tftp-server?
2. Can you try to download image through VR-Default?
3. Can you try to upgrade image through BootRom?

Hermes_Medina
New Contributor
I made a new config, for management port:

configure vlan Mgmt ipaddress 192.168.1.20 255.255.255.0
#
configure iproute add default 192.168.1.10 vr VR-Mgmt

and now I can ping from the server but not backwards. In fact I cant ping to 192.168.1.10 nor 192.168.1.20 from the switch.

Alexandr_P
Valued Contributor
#show vlan
#ping vr "VR-Mgmt" 192.168.1.10

what exacly message you have after
# download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"

X440-48p.25 # show vlan---------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------------
Default 1 --------------------------------T--------------- ANY 0 /48 VR-Default
Mgmt 4095 192.168.1.20 /24 ---------------------------- ANY 1 /1 VR-Mgmt
---------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (i) ISIS Enabled, (I) Inter-Switch Connection VLAN for MLAG,
(k) PTP Configured, (l) MPLS Enabled, (L) Loopback Enabled,
(m) IPmc Forwarding Enabled, (M) Translation Member VLAN or Subscriber VLAN,
(n) IP Multinetting Enabled, (N) Network Login VLAN, (o) OSPF Enabled,
(O) Flooding Disabled, (p) PIM Enabled, (P) EAPS protected VLAN,
(r) RIP Enabled, (R) Sub-VLAN IP Range Configured,
(s) Sub-VLAN, (S) Super-VLAN, (t) Translation VLAN or Network VLAN,
(T) Member of STP Domain, (v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled,
(Z) OpenFlow Enabled

Total number of VLAN(s) : 2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

* X440-48p.27 # ping vr "VR-Mgmt" 192.168.1.10
Ping(ICMP) 192.168.1.10: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 192.168.1.10: icmp_seq=0 ttl=128 time=0.733 ms
16 bytes from 192.168.1.10: icmp_seq=1 ttl=128 time=9.516 ms
16 bytes from 192.168.1.10: icmp_seq=2 ttl=128 time=9.407 ms
16 bytes from 192.168.1.10: icmp_seq=3 ttl=128 time=10 ms

--- 192.168.1.10 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 0/7/10 ms

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

X440-48p.28 # download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"Note: The inactive partition (secondary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no, - cancel) Yes

Downloading to SwitchError: Failed to download image - tftp: timeout

Hermes_Medina
New Contributor
X440-48p.22 # download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"
GTM-P2G8KFN