Downloading to SwitchError: Failed to download image - tftp: timeout
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 08:47 AM
Hello, Good morning.
If I have connectivity between the switch and tftp server(tftp32), why I get that message? what Im doing wrong?
If I have connectivity between the switch and tftp server(tftp32), why I get that message? what Im doing wrong?
23 REPLIES 23
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 11:13 AM
1. Can you try to use another PC with tftp-server?
2. Can you try to download image through VR-Default?
3. Can you try to upgrade image through BootRom?
2. Can you try to download image through VR-Default?
3. Can you try to upgrade image through BootRom?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 10:31 AM
I made a new config, for management port:
configure vlan Mgmt ipaddress 192.168.1.20 255.255.255.0
#
configure iproute add default 192.168.1.10 vr VR-Mgmt
and now I can ping from the server but not backwards. In fact I cant ping to 192.168.1.10 nor 192.168.1.20 from the switch.
configure vlan Mgmt ipaddress 192.168.1.20 255.255.255.0
#
configure iproute add default 192.168.1.10 vr VR-Mgmt
and now I can ping from the server but not backwards. In fact I cant ping to 192.168.1.10 nor 192.168.1.20 from the switch.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 10:24 AM
#show vlan
#ping vr "VR-Mgmt" 192.168.1.10
what exacly message you have after
# download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"
#ping vr "VR-Mgmt" 192.168.1.10
what exacly message you have after
# download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 10:24 AM
X440-48p.25 # show vlan---------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------------
Default 1 --------------------------------T--------------- ANY 0 /48 VR-Default
Mgmt 4095 192.168.1.20 /24 ---------------------------- ANY 1 /1 VR-Mgmt
---------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (i) ISIS Enabled, (I) Inter-Switch Connection VLAN for MLAG,
(k) PTP Configured, (l) MPLS Enabled, (L) Loopback Enabled,
(m) IPmc Forwarding Enabled, (M) Translation Member VLAN or Subscriber VLAN,
(n) IP Multinetting Enabled, (N) Network Login VLAN, (o) OSPF Enabled,
(O) Flooding Disabled, (p) PIM Enabled, (P) EAPS protected VLAN,
(r) RIP Enabled, (R) Sub-VLAN IP Range Configured,
(s) Sub-VLAN, (S) Super-VLAN, (t) Translation VLAN or Network VLAN,
(T) Member of STP Domain, (v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled,
(Z) OpenFlow Enabled
Total number of VLAN(s) : 2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
* X440-48p.27 # ping vr "VR-Mgmt" 192.168.1.10
Ping(ICMP) 192.168.1.10: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 192.168.1.10: icmp_seq=0 ttl=128 time=0.733 ms
16 bytes from 192.168.1.10: icmp_seq=1 ttl=128 time=9.516 ms
16 bytes from 192.168.1.10: icmp_seq=2 ttl=128 time=9.407 ms
16 bytes from 192.168.1.10: icmp_seq=3 ttl=128 time=10 ms
--- 192.168.1.10 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 0/7/10 ms
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
X440-48p.28 # download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"Note: The inactive partition (secondary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no, - cancel) Yes
Downloading to SwitchError: Failed to download image - tftp: timeout
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------------
Default 1 --------------------------------T--------------- ANY 0 /48 VR-Default
Mgmt 4095 192.168.1.20 /24 ---------------------------- ANY 1 /1 VR-Mgmt
---------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (i) ISIS Enabled, (I) Inter-Switch Connection VLAN for MLAG,
(k) PTP Configured, (l) MPLS Enabled, (L) Loopback Enabled,
(m) IPmc Forwarding Enabled, (M) Translation Member VLAN or Subscriber VLAN,
(n) IP Multinetting Enabled, (N) Network Login VLAN, (o) OSPF Enabled,
(O) Flooding Disabled, (p) PIM Enabled, (P) EAPS protected VLAN,
(r) RIP Enabled, (R) Sub-VLAN IP Range Configured,
(s) Sub-VLAN, (S) Super-VLAN, (t) Translation VLAN or Network VLAN,
(T) Member of STP Domain, (v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled,
(Z) OpenFlow Enabled
Total number of VLAN(s) : 2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
* X440-48p.27 # ping vr "VR-Mgmt" 192.168.1.10
Ping(ICMP) 192.168.1.10: 4 packets, 8 data bytes, interval 1 second(s).
16 bytes from 192.168.1.10: icmp_seq=0 ttl=128 time=0.733 ms
16 bytes from 192.168.1.10: icmp_seq=1 ttl=128 time=9.516 ms
16 bytes from 192.168.1.10: icmp_seq=2 ttl=128 time=9.407 ms
16 bytes from 192.168.1.10: icmp_seq=3 ttl=128 time=10 ms
--- 192.168.1.10 ping statistics ---
4 packets transmitted, 4 packets received, 0% loss
round-trip min/avg/max = 0/7/10 ms
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
X440-48p.28 # download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"Note: The inactive partition (secondary) will be used for installation.
Do you want to install image after downloading? (y - yes, n - no,
Downloading to SwitchError: Failed to download image - tftp: timeout
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎02-18-2015 10:18 AM
X440-48p.22 # download image 192.168.1.10 summitX-15.6.2.12.xos "VR-Mgmt"
