cancel
Showing results for 
Search instead for 
Did you mean: 

eaps and mlag

eaps and mlag

Fed_Ex
New Contributor II
Hello extreme guys

is it possible to configure a MLAG ISC-Link over protected eaps? Or are there any technical issues?

Thanks a lot for your reply.
14 REPLIES 14

Conor
New Contributor II
Yes, It's been working in EAPS for a long time on 8 or 9 rings. I'm trying to move away from EAPS and onto MALG, so any new switches will be in a MALG env. Thanks

Ron_Huygens
Community Manager Community Manager
Community Manager
Did you add the new VLAN as protected to EAPS as well?

Conor
New Contributor II
Slightly related:
I am have a problem Switching a routed vlan on a pair of BD's via EAPS and MLAG
The Shared EAPS port and the ISC are on different boards

My problem is when I add the vlan to all ports (EAPS Shared Port, ISC and MALG port) is causes a loop.
Any comments would be great.
Thanks

Sumit_Tokle
Contributor
Layer 2 protocols such as EAPS or STP will be configured to not allow the blocking of the ISC.

Paul_Russo
Extreme Employee
Hello Fed Ex

The thing to remember is that the ISC link can not be on an EAPS blocked port which means that neither switch in the MLAG can be a master with that link as secondary port.

Also you should always make sure that the ISC is in a redundant configuration.

Let me know if that helps or if you have more questions

Thanks
P
GTM-P2G8KFN