EXOS and NetSight: Could not get MAC and IP information in NetSight via PortTools/Port Monitor
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-21-2016 01:17 PM
We did not get any IP nor MAC information from connected devices at the ports of our new X440 switches via Netsight/Port Tools/Port Monitor. In the fields "Bridge Filtering Database" and "Node/Alias", where we can find the MAC and IP addresses of a connected device at our EOS switches. But all the EXOS switches say there: "No data found".
We would be very glad to get any recommendation to solve this problem. Thanks.
Switch X440-G2-48p-10GE4
ExtremeXOS version 22.1.1.5
Netsight Console v7.0.8.34
We would be very glad to get any recommendation to solve this problem. Thanks.
Switch X440-G2-48p-10GE4
ExtremeXOS version 22.1.1.5
Netsight Console v7.0.8.34
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-27-2016 04:38 AM
Hi Lutz, As far as i can see this information is populated using the OID's dot1dTpFdbEntry=1.3.6.1.2.1.17.4.3.1 , if i do a manual polling it if fetching the MAC address information but not when doing the port tools. I would suggest to open up a GTAC case to investigate this further.
