EXOS image corrupted

[Amjad]

I was upgrading summit x250-48p from 12.3 to 15.3.5.2 but unfortunately there was a disconnection while downloading the image from tftp. my EXOS got corrupted on both partition. I tried to get in bootstrap and boot from the primary and secondary but non of them were working.

How could I reinstall the EXOS image ?
Note: there is no download command in bootstrap.
just the below command are available:

loader
reboot
enable
h
help
?
hi
ping
boot
configip
showip

Could you please help ?

Regards,
Mahmoud

[Drew_C]

Let's keep this in one thread please.
https://community.extremenetworks.com/extremeswitching-exos-223284/summit-x250e-24t-boatroam-get-corrupted-7823680

[arun_k_panwar]

right now i am in boatloader. when i boot with image 1 and 2 i got error..........

BootRom > boot 1

Loading EXOS Image ...
Exception Cause=address error on store, SR=0x00000006, PC=0xa0000118
CONTEXT=0x00000000, XCONTEXT=0x00000000
BADVADDR=0xffffffff800471cf, ENTHI=0x00000000
ENTLO0=0x00000000, ENTLO1=0x00000000



BootRom > boot 2

Loading EXOS Image ...
Exception Cause=address error on store, SR=0x00000006, PC=0xa0000118
CONTEXT=0x00000000, XCONTEXT=0x00000000
BADVADDR=0xffffffff800471cf, ENTHI=0x00000000
ENTLO0=0x00000000, ENTLO1=0x00000000



kindly help me

[arun_k_panwar]

Sir how could i download .xos image in summit x250e-24t. when i press spacebar i got only BootStap.
my summit x250e-24t having some problem. when i press spacebar in booting time it shows only BootStrap.

please me thanks

[Drew_C]

I'd also like to point out that the BootROM isn't the same as the BootStrap. The BootROM menu is where you'll find the option to configure an IP address on the management port and download the image for recovery (per the instructions linked above).