This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Extreme Networks
- Community List
- Switching & Routing
- ExtremeSwitching (EXOS/Switch Engine)
- Extreme summit x440 access port suddenly down
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Extreme summit x440 access port suddenly down
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-15-2020 10:41 AM
Dear All Expert,
I’m facing this issue the access port is suddenly down. And my client told me the EAPS ring is down. And I am not sure is the ring down cause the access port devices down also. And I hope get heard some advice from the expert at here. Below is my log file.
09/26/2020 13:58:14.04 <Info:vlan.msgs.portLinkStateUp> Port 13 link UP at speed 100 Mbps and full-duplex
09/26/2020 13:57:59.60 <Info:vlan.msgs.portLinkStateDown> Port 13 link down
09/26/2020 02:48:04.87 <Info:vlan.msgs.portLinkStateUp> Port 6 link UP at speed 100 Mbps and full-duplex
09/26/2020 02:47:50.68 <Info:vlan.msgs.portLinkStateDown> Port 6 link down
09/24/2020 11:26:32.32 <Info:vlan.msgs.portLinkStateUp> Port 4 link UP at speed 100 Mbps and full-duplex
09/24/2020 11:26:18.47 <Info:vlan.msgs.portLinkStateDown> Port 4 link down
09/24/2020 04:30:07.95 <Info:vlan.msgs.portLinkStateUp> Port 20 link UP at speed 100 Mbps and full-duplex
09/24/2020 04:29:54.37 <Info:vlan.msgs.portLinkStateDown> Port 20 link down
09/24/2020 03:08:44.08 <Info:vlan.msgs.portLinkStateUp> Port 21 link UP at speed 100 Mbps and full-duplex
09/24/2020 03:08:29.68 <Info:vlan.msgs.portLinkStateDown> Port 21 link down
09/24/2020 03:05:11.46 <Info:vlan.msgs.portLinkStateUp> Port 18 link UP at speed 100 Mbps and full-duplex
09/24/2020 03:04:57.30 <Info:vlan.msgs.portLinkStateDown> Port 18 link down
09/24/2020 02:59:36.04 <Info:vlan.msgs.portLinkStateUp> Port 10 link UP at speed 100 Mbps and full-duplex
09/24/2020 02:59:21.92 <Info:vlan.msgs.portLinkStateDown> Port 10 link down
09/24/2020 02:16:49.67 <Info:vlan.msgs.portLinkStateUp> Port 5 link UP at speed 100 Mbps and full-duplex
09/24/2020 02:16:35.85 <Info:vlan.msgs.portLinkStateDown> Port 5 link down
09/23/2020 21:59:56.72 <Info:vlan.msgs.portLinkStateUp> Port 2 link UP at speed 100 Mbps and full-duplex
09/23/2020 21:59:42.23 <Info:vlan.msgs.portLinkStateDown> Port 2 link down
09/23/2020 20:45:30.26 <Info:vlan.msgs.portLinkStateUp> Port 17 link UP at speed 100 Mbps and full-duplex
09/23/2020 20:45:16.43 <Info:vlan.msgs.portLinkStateDown> Port 17 link down
09/23/2020 15:47:42.66 <Info:vlan.msgs.portLinkStateUp> Port 16 link UP at speed 100 Mbps and full-duplex
Best Regards
Chee Wong
Solved! Go to Solution.
1 ACCEPTED SOLUTION
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-17-2020 02:14 PM
Dear Miguel,
I had found out the root cause. There is 1 of the access switch is missing. That a reason the ring is detected. Once I revamp the uplink and change the ring port configuration. Finally the ring is up.
Best Regards
Chee Wong
8 REPLIES 8
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-16-2020 01:59 PM
cheewong,
The up/down pattern looks like an stp issue.
- When configuring EAPS you must ensure to disable stp on the ports participating in the EAPS ring to avoid STP to block the EAPS ports. I don’t see that in your config.
- Check here on how to do it : https://gtacknowledge.extremenetworks.com/articles/How_To/What-command-is-used-to-disable-STP-on-a-p...
- There is a “not very well documented feature” that highly recommends to use odd or even MLAG id’s and you are mixing odd and even MLAG id’s. I strongly suggest to change the MLAD id’s.
Mig
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-16-2020 01:46 PM
cheewong,
I see multiple EAPS domains. This requires a specific setup and has some constrains.
Can you share a topology diagram (can be handmade) showing how all this is interconnected?
Mig
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-16-2020 09:33 AM
Hi Miguel,
Below is the info. Also I found out at the EAPS “Ring-3” and “Ring-5” having error when show log. Appreciate that you can guide me how to solve this problem.
11/16/2020 17:16:32.45 <Noti:DM.Notice> Slot-1: Backup is in SYNC
11/16/2020 17:16:30.46 <Info:EAPS.RxPduLinkDown> Slot-1: EAPSD ring-R5 - Received Link-Down-Pdu (MAC = 00:04:96:9B:B1:4B)
11/16/2020 17:16:30.43 <Info:EAPS.RxPduLinkDown> Slot-1: EAPSD ring-R5 - Received Link-Down-Pdu (MAC = 00:04:96:9B:81:A4)
11/16/2020 17:16:30.43 <Info:EAPS.RxPduLinkDown> Slot-1: EAPSD ring-R3 - Received Link-Down-Pdu (MAC = 00:04:96:9B:80:9E)
11/16/2020 17:16:30.43 <Info:EAPS.RxPduLinkDown> Slot-1: EAPSD ring-R3 - Received Link-Down-Pdu (MAC = 00:04:96:9B:81:39)
----------------------------------------------------------------------------------------------------------------------------------
configure vlan default delete ports all
configure vr VR-Default delete ports 1:1-34,2:1-34
configure vr VR-Default add ports 1:1-34,2:1-34
configure vlan default delete ports 1:1-34,2:1-34
create vlan "ACAMS"
configure vlan ACAMS tag 15
create vlan "CCTV_DVMS-1"
configure vlan CCTV_DVMS-1 tag 10
create vlan "CCTV_DVMS-2"
Presconfigure vlan CCTV_DVMS-2 tag 11
create vlan "control-R1"
configure vlan control-R1 tag 4011
create vlan "control-R2"
configure vlan control-R2 tag 4012
create vlan "control-R3"
configure vlan control-R3 tag 4013
create vlan "control-R4"
configure vlan control-R4 tag 4014
create vlan "control-R5"
configure vlan control-R5 tag 4015
create vlan "control-R6"
configure vlan control-R6 tag 4016
create vlan "Intercom_IPAVIS-1"
configure vlan Intercom_IPAVIS-1 tag 12
create vlan "Intercom_IPAVIS-2"
configure vlan Intercom_IPAVIS-2 tag 13
create vlan "Intercom_IPAVIS-3"
configure vlan Intercom_IPAVIS-3 tag 14
create vlan "Manage"
configure vlan Manage tag 100
configure ports 1:29 auto off speed 10000 duplex full
configure ports 1:30 auto off speed 10000 duplex full
configure ports 1:31 auto off speed 10000 duplex full
configure ports 1:32 auto off speed 10000 duplex full
configure ports 1:33 auto off speed 10000 duplex full
configure ports 1:34 auto off speed 10000 duplex full
configure ports 2:29 auto off speed 10000 duplex full
configure ports 2:30 auto off speed 10000 duplex full
configure ports 2:31 auto off speed 10000 duplex full
configure ports 2:32 auto off speed 10000 duplex full
configure ports 2:33 auto off speed 10000 duplex full
configure ports 2:34 auto off speed 10000 duplex full
configure vlan ACAMS add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan CCTV_DVMS-1 add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan CCTV_DVMS-2 add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan control-R1 add ports 1:28,2:28 tagged
configure vlan control-R2 add ports 1:2,2:2 tagged
configure vlan control-R3 add ports 1:3,2:3 tagged
configure vlan control-R4 add ports 1:4,2:4 tagged
configure vlan control-R5 add ports 1:5,2:5 tagged
configure vlan control-R6 add ports 1:6,2:6 tagged
configure vlan Default add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan Intercom_IPAVIS-1 add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan Intercom_IPAVIS-2 add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan Intercom_IPAVIS-3 add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan Manage add ports 1:1-6,1:28,2:1-6,2:28 tagged
configure vlan Manage add ports 1:27,2:27 untagged
configure vlan Manage ipaddress 10.10.10.254 255.255.255.0
enable ipforwarding vlan Manage
configure vlan CCTV_DVMS-1 ipaddress 192.168.10.254 255.255.255.0
enable ipforwarding vlan CCTV_DVMS-1
configure vlan CCTV_DVMS-2 ipaddress 192.168.11.254 255.255.255.0
enable ipforwarding vlan CCTV_DVMS-2
configure vlan Intercom_IPAVIS-1 ipaddress 192.168.12.254 255.255.255.0
enable ipforwarding vlan Intercom_IPAVIS-1
configure vlan Intercom_IPAVIS-2 ipaddress 192.168.13.254 255.255.255.0
enable ipforwarding vlan Intercom_IPAVIS-2
configure vlan Intercom_IPAVIS-3 ipaddress 192.168.14.254 255.255.255.0
enable ipforwarding vlan Intercom_IPAVIS-3
configure vlan ACAMS ipaddress 192.168.15.254 255.255.255.0
enable ipforwarding vlan ACAMS
* Slot-1 Astaka-Core-SW.19 # show eaps
EAPS Enabled: Yes
EAPS Fast-Convergence: On
EAPS Display Config Warnings: On
EAPS Multicast Add Ring Ports: Off
EAPS Multicast Send IGMP and MLD Query: On
EAPS Multicast Temporary Flooding: Off
EAPS Multicast Temporary Flooding Duration: 15 sec
Number of EAPS instances: 6
# EAPS domain configuration :
----------------------------------------------------------------------------------
Domain State Mo En Pri Sec Control-Vlan VID Count Prio
----------------------------------------------------------------------------------
ring-R1 Complete M Y 1:28 2:28 control-R1 (4011) 8 N
ring-R3 Failed M Y 1:3 2:3 control-R3 (4013) 8 N
ring-R4 Complete M Y 1:4 2:4 control-R4 (4014) 8 N
ring-R5 Failed M Y 1:5 2:5 control-R5 (4015) 8 N
ring-R6 Complete M Y 1:6 2:6 control-R6 (4016) 8 N
----------------------------------------------------------------------------------
Flags : (!) CFM Down
* Slot-1 Astaka-Core-SW.20 #
* Slot-1 Astaka-Core-SW.21 # show eaps ring-R3
Name: ring-R3 Priority: Normal
State: Failed Running: Yes
Enabled: Yes Mode: Master
Primary port: 1:3 Port status: Up Tag status: Tagged
Secondary port: 2:3 Port status: Up Tag status: Tagged
Hello Egress Port: Primary
Hello timer interval: 1 sec 0 millisec
Fail timer interval: 3 sec 0 millisec
Fail Timer expiry action: Send alert
Last valid EAPS update: None till now.
EAPS Domain has following Controller Vlan:
Vlan Name VID
control-R3 4013
EAPS Domain has following Protected Vlan(s):
Vlan Name VID
ACAMS 15
Manage 100
Default 1
CCTV_DVMS-1 10
CCTV_DVMS-2 11
Intercom_IPAVIS-1 12
Intercom_IPAVIS-2 13
Intercom_IPAVIS-3 14
Number of Protected Vlans: 8
* Slot-1 Astaka-Core-SW.22 # show eaps ring-R5
Name: ring-R5 Priority: Normal
State: Failed Running: Yes
Enabled: Yes Mode: Master
Primary port: 1:5 Port status: Up Tag status: Tagged
Secondary port: 2:5 Port status: Up Tag status: Tagged
Hello Egress Port: Primary
Hello timer interval: 1 sec 0 millisec
Fail timer interval: 3 sec 0 millisec
Fail Timer expiry action: Send alert
Last update: From Master Id 02:04:96:99:6f:4a, at Sat Aug 15 02:39:51 2020
EAPS Domain has following Controller Vlan:
Vlan Name VID
control-R5 4015
EAPS Domain has following Protected Vlan(s):
Vlan Name VID
ACAMS 15
Manage 100
Default 1
CCTV_DVMS-1 10
CCTV_DVMS-2 11
Intercom_IPAVIS-1 12
Intercom_IPAVIS-2 13
Intercom_IPAVIS-3 14
Number of Protected Vlans: 8
* Slot-1 Astaka-Core-SW.23 #
Best Regards
Chee Wong
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-15-2020 11:35 AM
cheewong,
You’ll have to share more info.
show config
show eaps
show eaps <eaps domain name>
Mig
