ExtremeSwitching (EXOS/Switch Engine) - Page 480 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to partition compact flash card

I have a Summit X350-48t which has XOS booting issue. Nothing comes up in serial console and Mgmt LED blinks a little faster than usual. I already have the fresh copy of XOS image for this switch but having a little problem with flash partitioning. I...

Resolved! Command to change the switch port speed from Auto to 100mbps

I have being using the summit X440-48P as edge switch. There are 3 different models of IP telephones which is connected directly to this switch are able to get the IP and are registered to its PBX in which PBX is located in the cloud. Only one model ...

Event log can't be displayed in the web view (EXOS 16)

Hello all. I manage Black Diamond switches running EXOS 16. Web view for some switches can not display event logs. I still can display event logs using the "show log" command . Can anybody provide support for this issue ?

ExOS rate-limit flood- broadcast Flood Rate Exceeded

Hi everyone.I have some problem with control broadcast in my network.If i set broadcast flood rate in something like 30000, i saw that Flood Rate Exceeded counter increases, but in Rx Pkt Bcast i saw maximum 50-100 packets per second.MCast & UnkCast ...

x670 trunk link

Hello everyones! I wanna buy a x620 extreme switch with 16 10G ports. I need 2 trunk links including 4 ports each as a lacp LAG. The question is can I configure following properties on it or not: 1-Making more than 8 LACP port in a trunk link 2-Dec...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN