Extreme Switch with authentication with fingerprint device

[Sebastian_Rojas]

Hello,

I have a question, when a user mark his figerprint i an biometric device, can i order the switch port related to that user to power on and when the user go to his home, the switch port
power off,

What kind of feature do i need to complete this task, there is something related to the extreme vendor, such a NAC device, can i use other alternatives ?
or something like that or is only about in de CLI of the switch with support of 802.1X.

We have summit x440Summit

Can anyone help me with this, to know if this can be done
Thanks a lot for your time
Best Regards

[Sebastian_Rojas]

Hello Drew,

i will read the the identity management in the reference bookmap

https://www.extremenetworks.com/wp-content/uploads/2014/03/EXOSReference_bookmap.pdf

pag. 1627

i read about a UPM scripting in forums and a found this type, thi

#############################################################

create upm profile disable-ports
disable port 1
.

create upm profile enable-ports
enable port 1
.



create upm timer disableports
configure upm timer disableports profile disableports
configure upm timer disableports at 9 15 2009 19 00 00 every 86400

create upm timer enableports
configure upm timer enableports profile enableports
configure upm timer enableports at 9 16 2009 7 00 00 every 86400

###################################################################

Link of the script : http://www.tek-tips.com/viewthread.cfm?qid=1594011

This is the form of create a UPM script?
there is a type of guide to know the commands about the UPM scripting

Thanks a lot for all your help!

[Drew_C]

You're welcome! good luck 🙂

[Sebastian_Rojas]

Thanks a lot for all your help, if i have any problem when i try to connect to the ldap and run the script, i will post for a review!

Thanks for your help and patience
Best Regards

[Drew_C]

That's the basic idea for UPM. Here's another brief overview of how it works:
https://community.extremenetworks.com/extreme/topics/poe-scheduling-upm-profiles

And another example using the above thread:
https://community.extremenetworks.com/extreme/topics/activate-a-copper-port-based-on-day-and-time

Unfortunately, I don't have any working example scripts other than the outlines in the two threads above. Aside from triggering on fingerprint authentication, you're really close with this.