cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Extreme x620-16t Inventory manager archive error "Connection Refused" CLI access is not enabled

Phillip_Hood
New Contributor
I have 2 x620-16t switches that my coworker has setup. The 2nd switch was setup using the config from the first one and had the IP changed so the config should be the same. However, I am not able to get the archive working in EMC/Inventory Mgr. It gives the error "Connection refused, CLI access is not enabled for this device". I got the first one working but this one will not. How to I enable this when all settings that I know of are or should be the same as the first switch?
17 REPLIES 17

Patch 1-2

What is the patch?

Firmware Rev 1.0.1.7, Software Rev 21.1.1.4

Anything in the switch log?
Regards Zdeněk Pala

Ronald_Dvorak
Honored Contributor
Check in EMC if both are set to the same profile in device mapping (lower part of the screen) ...

060f9e3b7c2b46cf81b29533db1681eb_RackMultipart20170209-749-os2mq0-EMC_SNMP_device_mapping_inline.png



GTM-P2G8KFN