10-21-2020 08:47 PM
I am upgrading some x620 switches. Right now they are running version 22.2.1.5-patch1-4. Am I able to go to the latest recommended release of 30.7.1.1-patch1-23 or would it best to stuck with the 22 version? Sorry for the newbie question…...Thanks.
Solved! Go to Solution.
10-21-2020 08:49 PM
Hi cback85,
The X620 will support the newer version, and there is no intermediate step--you can upgrade directly.
Thanks
Brad
10-22-2020 09:26 PM
Also after you upgrade you can also use the command “show configuration difference”(first available in 22.5) to see the differences between the startup configuration and running.
Thanks,
Chris Thompson
10-22-2020 07:27 PM
Wow thanks everyone!!
10-22-2020 07:11 PM
As long as it is saved that is correct. If you see the asterisk in front of the sysname then the running configuration does not match the start up configuration:
Not saved:
* ExtremeCore.1 #
Saved:
ExtremeCore.2 #
Thanks,
Chris Thompson
10-22-2020 01:53 PM
I assume the configuration will stay the same after the upgrade?