I am upgrading some x620 switches. Right now they are running version 22.2.1.5-patch1-4. Am I able to go to the latest recommended release of 30.7.1.1-patch1-23 or would it best to stuck with the 22 version? Sorry for the newbie question…...Thanks.
Also after you upgrade you can also use the command “show configuration difference”(first available in 22.5) to see the differences between the startup configuration and running.
As long as it is saved that is correct. If you see the asterisk in front of the sysname then the running configuration does not match the start up configuration:
