cancel
Showing results for 
Search instead for 
Did you mean: 

Function pointer is not initialized

Function pointer is not initialized

eyeV
New Contributor III

Hi everybody.

I've got some strange log messages after disabling sharing on both X670V-48x (15.5.4.2 patch1-5).

02/20/2016 06:02:07.04 Function pointer is not initialized. Caller: 0x4424c8 Parm1: 0x1000004 Parm2: 0xf424c
02/20/2016 06:02:06.86 :: (ssh) m.ermakov: disable sharing 42
02/20/2016 06:01:52.27 :: (ssh) m.ermakov: disable mlag port 42I've found this article https://extremeportal.force.com/ExtrArticleDetail?an=000076970 but it's not exactly what I've seen.

Any suggestions?

7 REPLIES 7

Drew_C
Valued Contributor III
Are there any updates on this one?

eyeV
New Contributor III
Oh... my poor ugly English )

eyeV
New Contributor III
Hi Drew.
I couldn't repeat the case. So everithing is works right now. )

Henrique
Extreme Employee
Hi eyeV,

Based on the log messages, it seems that those commands/function were not reflected on the switch memory.

You can check the switch configuration and be sure these parameters (MLAG and LAG configurations) are no longer there and also monitor the environment for any impact or abnormal behavior.
GTM-P2G8KFN