cancel
Showing results for 
Search instead for 
Did you mean: 

Hello. Please Help!! X460G2 is running with formware version 22.1.1.5.

Hello. Please Help!! X460G2 is running with formware version 22.1.1.5.

Angel_Pavon1
New Contributor III
My X460G2 was rebooted and upgraded to firmare version 22.1.1.5. This was intermittent about six hours. Then I rebooted again and its up. But can u help me?... What does this los´ mean?

03/06/2017 02:10:22.37 Slot-1: EPM Started
03/06/2017 02:10:22.36 Slot-1: Booting after System Failure.
03/06/2017 02:10:22.26 Slot-2: Booting after System Failure.
03/06/2017 02:10:22.18 Slot-3: Booting after System Failure.
03/06/2017 02:10:21.25 Slot-1: Changing to watchdog warm reset mode

thanks.!!

9 REPLIES 9

Angel_Pavon1
New Contributor III
I found the problem, and yes affectively it was the power. Thanks a lot. One more cuestion.
What do you think about firmware version 22.1.1.5?
Do you know if this has some problems whith another versions?

Hi Angel,

I have the same problem, so what was your conclusion about the error. Did you change the power supply? power cord?

Thanks
Sylvain

Thanks a lot!!!! Friends.

Please refer to the Release Notes below for 22.1 -
This EXOS version doesn't have the fix for the SSH issues: http://documentation.extremenetworks.com/release_notes/ExtremeXOS/22.1/downloads/ExtremeXOS_22.1_Rel...

Please refer to the Release Notes below for 22.2 -
This EXOS version contains the fix for the SSH issues: http://documentation.extremenetworks.com/release_notes/ExtremeXOS/22.2/downloads/ExtremeXOS_22.2_Rel...
GTM-P2G8KFN