Help me write UPM script

[Karfax]

Hi!

Help me write simple UPM script.
I need what script do next:

If link on port 25 down, script do next command:
conf vlan VLANNAME del po 25
conf vlan VLANNAME add po 29 tag

If link on port 25 is up then:
conf vlan VLANNAME del po 29
conf vlan VLANNAME add po 25 tag


EXOS 12.6.5.2 patch1-3

[Stephane_Grosj1]

Hi,

this is a simple UPM script that goes like that:

code:

create upm profile MyUPMProfile

enable cli scripting

IF (!$MATCH($EVENT.LOG_COMPONENT_SUBCOMPONENT,vlan.msgs) && !$MATCH($EVENT.LOG_EVENT,portLinkStateDown)) THEN
    IF (!$MATCH($EVENT.LOG_PARAM_0,25)) THEN
        config vlan VLANNAME del port 25
        config vlan VLANNAME add port 29 tag
    ENDIF
ELSE
    IF (!$MATCH($EVENT.LOG_COMPONENT_SUBCOMPONENT,vlan.msgs) && !$MATCH($EVENT.LOG_EVENT,portLinkStateUp)) THEN
        IF (!$MATCH($EVENT.LOG_PARAM_0,25)) THEN
            config vlan VLANNAME del port 29
            config vlan VLANNAME add port 25 tag
        ENDIF
    ENDIF
ENDIF

.

create log filter MyLogFilter
configure log filter MyLogFilter add event vlan.msgs.portLinkStateDown
configure log filter MyLogFilter add event vlan.msgs.portLinkStateUp

create log target upm MyUPMProfile
enable log target upm MyUPMProfile
config log target upm MyUPMProfile filter MyLogFilter severity Info