Help required for EXOS 15.6 source ip based PBR

[Chew_Choon_Chon]

Running XOS 15.6 on X770 and configured ACL to match on source-address and ACL matches, but the actions i tried e.g. "redirect" and "redirect-name" to change nexthop does not work but instead the switch continues to use the default routing table. Anyone know of any PBR related bug on the version of XOS as we verified the commands exactly same as given in official concept guide and ACL solution guides?

[Chew_Choon_Chon]

I have not used count, but instead changed the action from redirect to deny instead and found it had really denied the matched (source-address) traffic. So i am very sure ACL was it. Just both redirect and redirect-name did not work. Thanks.

[Bill_Stritzinge]

Hello,

As far as I can see there is no bug that would preclude policy based routing on the X770. Sometimes I find it helpful to put an ACL counter into my statements to make sure the the ACL's are actually hitting. Add the "count" as an action and as you send traffic you can check the counters to make sure the match criteria is taking. I would check that first and let me know if you need additional support.

Thanks.. Bill