This is an issue that we have been fighting with for almost 3 years now (since we migrated to x460-G2 and x440-G2 switchesAll devices are running 30.7.2.1 and we have two sites that are configured the exact same way (shown below):At one site, we have...
I am working with a large NVX network that will be connected to a stack of Extreme Switches. There are (5) X450-G2-48T-10GE4 in the stack. IGMP snooping is enabled, and IGMP Fast Leave. When connecting a few NVX-352c and running video test, video com...
I have 2 x620-16t switches that my coworker has setup. The 2nd switch was setup using the config from the first one and had the IP changed so the config should be the same. However, I am not able to get the archive working in EMC/Inventory Mgr. It...
i recently tested the new exos firmware 31.2.1.1 on our x440-g2 switches.after the installation clients can’t authenticate via dot1x any longer. radius server reports a timeout. we are using aruba clearpass as radius server and get the following log ...
1. What exactly does "iproute reserved-entries" mean?2. Is “12240” the number currently in use? 3. What is the meaning of "show iproute reserved-entries" and "show iproute reserved-entries statistics"? (The difference between the two) ->show iproute ...
