cancel
Showing results for 
Search instead for 
Did you mean: 

hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.

hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.

Jun_Papa
New Contributor
hi guys what is the equivalent cisco command; spanning-tree and portfast to extreme.. Thanks in advance.
11 REPLIES 11

Jun_Papa
New Contributor
version 16.23
MSTP Global Configuration:
MSTP Region Name : 000496984141
MSTP Format Identifier : 0
MSTP Revision Level : 3
MSTP Digest : ac:36:17:7f:50:28:3c:d4:b8:38:21:d8:ab:26:de:62
Common and Internal Spanning Tree (CIST) : ----
Total Number of MST Instances (MSTI) : 0

Name Tag Flags Ports Bridge ID Designated Root Rt Port Rt Cost
s0 0000 D----- 1 8000000496984141 0000000000000000 ------- 0

Total number of STPDs: 1 STP Flush Method: VLAN and Port
STP Filter Method: System-wide

Flags: (C) Topology Change, (D) Disable, (E) Enable, (R) Rapid Root Failover
(T) Topology Change Detected, (M) MSTP CIST, (I) MSTP MSTI

Jeremy_Gibbs
Contributor
What version of code are you running? If you type show stpd ?... what stp domains are listed?

Jun_Papa
New Contributor
i got this line;
502.2 # configure stpd "s0" ports link-type edge 6,7
Error: Port 6 is not a member of STP domain s0
Error: Port 7 is not a member of STP domain s0
Error: Command aborted due to input errors, no changes made

Jeremy_Gibbs
Contributor
I think this does it configure stpd "s0" ports link-type edge 1:2

davidj_cogliane
Contributor
Unless you are trying to use stp for redundancy I would recommend elrp. ELRP is very easy to configure and reliable. The only downside is that it lacks the dynamic enable when the loop condition is cleared. Best of luck,
GTM-P2G8KFN