how can i enable gui in X460 r X440

[zain_mallick]

how can i enable GUI in X440 X460....i m creating vlan and give ip and enable web hhtp..but not open gui interface...? plz guide me...this is my code

create vlan name
configuration vlan name tag name
configuration vlan name ipaddress 192.168.1.225 255.255.255.0
configruatoin vlan name add ports 4 untageed
enable web http

this is my code which i run in X460 summit extreme ,but not showing GUI interface...
and when i connect wire with port ,port light is not on...

[Drew_C]

Are you still having trouble with this, Zain?

[zain_mallick]

thanx sir....no sir...

[Patrick_Voss]

Hello Zain,

Can you access the switch via telnet? using the same ip address you are using for the web interface? If not I would recommend consoling into the switch again and check the port status using the "show port command. If it is working correctly it should say enabled and active.

Check this out and let us know what you see. Pasting the outputs can help as well.

[Karthik_Mohando]

Hi Zain,

Thanks and did that solve the issue were you able to get the GUI now?