In Exos, you can issue a “show port xx vlan” to get a short, simple list of vlan’s on a port. Is there a similar way to get a brief list of ports within a vlan (as opposed to “show vlan xx”, where it’s a small block of info at the bottom? I want to s...
We have a client installation that has 2 x870 switches installed since 2017. As of today one of those switches is running its fans at full speed non-stop while the other is operating normally. Both switches show a temp of 90c which is within normal r...
Hi guys,I have been working with IPTV for one year, so, all switch involved in this topology are x460, in this network I have mpls and vr created, nonetheless the multicast traffic is going through a specific VR with pim enabled.Everything is working...
Have an interesting dilema. We’re using a VLAN (4090) between two X620 MLAG cores (east/west campus). We’re routing two small subnets from within the Extreme default VR on each side into this transit VLAN for for high-speed connections between PBX’s....
Hello Community, What if the MPLS LDP Adjacencies reach above the limitation ? What`s the behaviour? I do have one X670-G2 with 83 adjacencies/peer and I`m curious to know if there`s some information in the switch to know if some parameters are abo...
