How can I use chalet on a new switch?

[Ruth_Hinds]

Please what cable will I use to connect to the management switch to use chalet. Have summit X440 switch. and how do i get the last 2 numbers for the ip address.

[Ruth_Hinds]

Now I have configured the IP address for the management port but unfortunately I cannot ping my ip address which has the tftp server on it.

[Drew_C]

Hi Ruth,
There are numerous links to articles posted in this thread that will give you the information you're looking for.
Specifically, this one posted by Brandon Clay: How to configure an IP address on the management interface of an EXOS switch

If you have any trouble, let us know!

[Ruth_Hinds]

Can someone please tell me how to configure the virtual router so that I can upgrade the EXOS or give me the ip address because I am trying to retrieve the image from the tftp server.

Thank you.

[Drew_C]

Hi Ruth,
Please take a look at this article: How to Obtain and Upgrade EXOS
If you want Chalet, I would recommend either v15.7.2.9 or v16.1.1.4-patch1-1. If you want Chalet, they're the most recent two versions that have it.

[Ruth_Hinds]

Thank you all. I did not change the com port in putty and that is why I was not able to connect to it. Please how can i upgrade to v15.7 or later for the IOS so that I can connect to to the chalet.