Hello;I have the following network topology and when there is any change in the network I lose connectivity with the switches for a long time. also when I configure the neighbor port on port 52 of switch 3 I permanently lose connectivity between som...
Hello;I have the following configuration on my switch and I cannot access from my laptop connected to port 1 of the switch:create vlan "MANAGE"configure vlan MANAGE tag 1000configure vlan MANAGE add ports 1 taggedconfigure vlan MANAGE add ports 51-52...
Hi teamscan you write command on extreme to do same bellow commandip access-list extended 10010 deny ip 192.168.6.0 0.0.0.255 192.168.2.0 0.0.0.25511 deny ip 192.168.6.0 0.0.0.255 192.168.5.0 0.0.0.25512 permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255....
Is there a way to exclude a range/single ip address from "configure vlan dhcp-address-range xxxx - xxxx" for example: configure vlan vlan_name dhcp-address-range 10.1.1.20 - 10.1.1.254 Can I exclude 10.1.1.60 from being allocated?
Hello everybody.I’m struggling with a conf about msdp filter.I want apply outbound filter toward a msdp peer: configure msdp peer 192.168.1.2 sa-filter out msdp_policy_outmsdp_policy_out.polentry permit { if match any { nlri 239...
