How I can check port-up-down trap settings in Summit Ver2 Stack ?

[Weda]

How I can check port-up-down trap settings in Summit Ver 2Stack with ExtremeXOS (Stack) version 16.1.2.14 16.1.2.14 ?

[Henrique]

Just an addition:

You can enable/disable port-up-down SNMP trap using the following command:

[enable | disable] snmp traps port-up-down ports [all | ]

[Prashanth_KG]

Hi Weda,

Have you tried the following command,

"show port info detail"

You can look for the setting in the output as below:

Link up/down SNMP trap filter setting: Enabled

Also, you can verify the configuration by filtering them using the following usage:

"show configuration detail | include port-up-down"

Hope this helps!
Let us know if you are looking for any other command.