ExtremeSwitching (EXOS/Switch Engine) - Page 181 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! In EXOS how can I duplicate Cisco's switchport port-security mac-address sticky command?

We would like to lock down switchports on Exteme X450-G2's so nobody can move or connect their own equipment and obtain network access. We currently do this today with Cisco switches and the configuration is done on a port by port basis. Its very e...

Resolved! X440-G2-24x temperature

Hello, all! I understand that "The Summit G2 series of switches and others running EXOS 21.x (or higher) monitor CPU temperature instead of ambient temperature and therefore may show slightly higher temperatures than other models." But now I have X...

Resolved! BEB switch - IS-IS required?

Hello, We are planning the hardware for an Extreme fabric topology and were wondering whether the BEB switches require IS-IS. If they do would it make sense to purchase an X450-G2 and upgrade from Edge - Advanced - Core or purchase a X460-G2 and upg...

how to configure ip in extreme switch so i can take SSH or Telnet For that particular switch

how to configure ip in extreme switch so i can take SSH or Telnet For that particular switch

How to configure existing core switch as stack

Hi all, Currently, I'm using Summit X460-G2-24x-10GE4 switch as Core switch and hope to add another Summit X460-G2-24x-10GE4 switch to the Core and Stack both switches. Currently core switch has only a few VLANs and few routing as configuration. I ne...

Top Kudoed Authors

User

Count

27

18

16

16

12

GTM-P2G8KFN