How to Config MPLS to use with "Xconnect" (cisco)

[WP]

Example of cisco command ################################################# interface Vlan1234 mtu 15xx xconnect xxx.xxx.xxx.xxx 1234567890 encapsulation mpls no shutdown ! Anybody have an idea to cfg Exos, and work with Cisco xconnect. Thank you

[Andreas_Larsen]

You can use PWs if you have the right license to do it. I have tested it to work togheter with Huawei, Juniper but not currently Cisco.

[PIYAPONG_YWR]

xconnect is definitely not possible, Because it's Cisco proprietary. but VPLS VPWS might be possible.