ExtremeSwitching (EXOS/Switch Engine) - Page 131 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Does 31.3.1-Patch1-5 fix Gigabit SFP modules in 5520 EXOS VIM-4X slots?

I’m just checking in if anyone with EXOS 5520 switches loaded the latest 31.3.1.3.Patch1-5 that was released on 7/1/2021. We have had an issue where 1gbps optics or copper SFP modules in the VIM-4X ports would link up, but not pass traffic. See orig...

Resolved! RESTCONF node fails on X450 stack

I’ve got several X450 stacks on site, and one X450 non-stacked unit. All units are running EXOS 31.3.1.3If I go to the following RESTCONF URL on the unstacked switch everything comes up fine:http://<ip>/rest/restconf/data/openconfig-network-instance:...

Resolved! Is there an EXOS equivalent to Cisco DTP?

Is there a way to disable Dynamic Trunking Protocol in EXOS? I plugged in a switch for initial config to a port that had some vlans tagged and one that is untagged. The port on the new switch dynamically set the port to have those vlans tagged. I am ...

Resolved! Unable to remove application-priority under access-list zone (default priority unknown application) – Module acl configurations

Hello Everyone,I am unable to remove configurations under access-list zone application priority for specific applications, i checked the topic How to remove application access-list under system zone that is seen under "show configuration acl" output?...

Resolved! Port mirroring limitation for X440 and X460 Series

Hello, I am trying to get information about port mirroring limitations in X440-G2 and X460-G2 series switches. Also, is there differences between models (12, 24, 48 ports)? Thanks Andrea

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN