How to configure SNMP v1v2c on Extreme Switch

[yvesantoci]

Hello guys, how are you?

Could you please help me with a SNMP configuration?

I have a Zabbix server and I have two extreme switches

I need to configure these two switches with SNMP v1v2c with the port 161 to zabbix server.

Could you please send me a step-by-step to do this from the ground-zero?

Regards,

Yves Antoci

[yvesantoci · Accepted solution]

Stefan, good morning

This is my whole snmp configuration

Regards,

[Stefan_K_]

Hi,

what do you mean “not working”?

Any infos in the log (command: “show log”) or in the management infos ( command: “show management” there are some infos about snmp at the end of the output)? “Auth”Errors or similar. 

[yvesantoci]

Hello Stefan, 

Thanks for the prompt response

But I have already did this configuration, but still not working…

My switch is already configured

[Stefan_K_]

Hi Yves,

How To: How to enable SNMPv2 on EXOS | Extreme Portal (force.com) 

This should answer your question.

Or do you need a guide on how to do the initial configuration of the whole switch? Is your switch completely unconfigured?