How to configure two vlan in one switch to communicate without using the tagging port

[zahirtalib]

Hi Guys,

I want to know it is possible to configure two vlan in one switch to communicate without using the tagging port?

[zahirtalib]

I have enable the ipfowarding but i still not able to communicate between these two vlan. Below is my config:

---------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
---------------------------------------------------------------------------------------------
Default 1 ------------------------------------------------ ANY 0 /0 VR-Default
MAXIS 20 192.168.3.251 /24 -f------m------------------- ANY 5 /18 VR-Default
Mgmt 4095 ------------------------------------------------ ANY 0 /1 VR-Mgmt
TIMEDOTCOM 10 192.168.7.1 /24 -f------m------------------- ANY 1 /8 VR-Default
---------------------------------------------------------------------------------------------

[zahirtalib]

Hi Jan,

Can you provide me some command example for the InterVLAN routing that you mention above?

[SchmuFoo]

This should help:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-inter-VLAN-routing-in-EXOS

Cheers
Jan

[SchmuFoo]

Configure InterVLAN routing or use an crosscable and connect two access ports which are in different VLANs.