Hello,I want to modify protected vlan by adding a new one in switchs configured with an ERPS ring and I want to know the risk with this modification and what precaution to have doing this configuration.the switchs used in this ring is BD8810 and X690...
I have just been setting up two new X590s with this version and found that two commands were enabled without me doing anything, yet the docs show that the default behaviour is disabledI suspect the docs are right and the config change is an error bec...
hello when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch:information on SW####################Slot: Slot-1 * Slot-2 ------------------------ -------------------...
Hello together, I tried connecting to a X870 (Firmware: 30.2.1.8) via the serial console, but the only thing I got back was this message:“E749: empty buffer” Unfortunately I was unable to find the source of this, maybe you can help me out with this. ...
Hello;I have configured an MLAG between 2 X590 routers with a double LACP link between them. This is my configuration:R1:create vlan "MANAGE"configure vlan MANAGE tag 1000create vlan "MLAG_CORE"configure vlan MLAG_CORE tag 250configure ports 29 descr...
