cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

How to copy one Switch configuration to another Switch with encrypted passwords

How to copy one Switch configuration to another Switch with encrypted passwords

holden
New Contributor
Hi,

i need to copy the config from a LAN attached Switch to a local switch to replace it later?

If i run the show conf to get the running config of the LAN attached switch in plaintext and paste it to the local(not LAN Attched device) it will not enter the encrypted passwords for Radius.(not well formated)

I dont know the Passwords and their are encrypted.

How can i copy a configuration from the LAN Attched device to the local device or create from this config a template to for configuration of other devices?

7 REPLIES 7

holden
New Contributor
no thats not neccessary. i will enter it unencrypted.

holden
New Contributor
Hi,

we are using 15.3.5.2

Drew_C
Valued Contributor III
It may have gotten fixed in one place and not another. Sounds like we need to get a ticket opened to confirm and get over to Engineering.
Can you open a case with GTAC?

holden
New Contributor
Sorry, after configuring another switch, i have the same issue again:

configure netlogin add mac-list ff:ff:ff:ff:ff:ff 48 encrypted "xxxxxxxxx"
not well-formed (invalid data)* Slot-1

The encrypted password contains:"&;'=" and Characters(capital-noncapital) and Numbers

GTM-P2G8KFN