How to copy one Switch configuration to another Switch with encrypted passwords

[holden]

Hi,

i need to copy the config from a LAN attached Switch to a local switch to replace it later?

If i run the show conf to get the running config of the LAN attached switch in plaintext and paste it to the local(not LAN Attched device) it will not enter the encrypted passwords for Radius.(not well formated)

I dont know the Passwords and their are encrypted.

How can i copy a configuration from the LAN Attched device to the local device or create from this config a template to for configuration of other devices?

[holden]

no thats not neccessary. i will enter it unencrypted.

[holden]

Hi,

we are using 15.3.5.2

[Drew_C]

It may have gotten fixed in one place and not another. Sounds like we need to get a ticket opened to confirm and get over to Engineering.
Can you open a case with GTAC?

[holden]

Sorry, after configuring another switch, i have the same issue again:

configure netlogin add mac-list ff:ff:ff:ff:ff:ff 48 encrypted "xxxxxxxxx"
not well-formed (invalid data)* Slot-1

The encrypted password contains:"&;'=" and Characters(capital-noncapital) and Numbers