How to display maximum throughput of the routing engine on a XOS switch

[George_van_Asse]

We would like to know how much data is going through the routing engine of a BD8800, in other words how much traffic is routed by the switch (the actual maximum we would like to learn)

[George_van_Asse]

Hello Drew,

Above the output of the show slot command.. Excuse me for my late reply but had a internet free day yesterday...

George

[George_van_Asse]

Hello Drew,

Thanks for your reply. Yes, but these are the theoretical numbers.
We would like to know the actual ammount of routed traffic on our blackdiamond, or better yet what is the maximum ammount of routed traffic our blackdiamond has to deal with, the peek moment.

George

[George_van_Asse]

show sl

[KBD-CR1A.2 # show slot



Slots Type Configured State Ports Flags

-------------------------------------------------------------------------------

Slot-1 G48Tc G48Tc Operational 48 M

Slot-2 G48Tc G48Tc Operational 48 M

Slot-3 G48Tc G48Tc Operational 48 M

Slot-4 Empty 0

Slot-5 Empty 0

Slot-6 Empty 0

Slot-7 10G4Xc 10G4Xc Operational 4 M

Slot-8 Empty 0

Slot-9 Empty 0

Slot-10 G48Xc G48Xc Operational 48 M

MSM-A MSM-48c Operational 0

MSM-B Empty 0



Flags : M - Backplane link to Master is Active

B - Backplane link to Backup is also Active

D - Slot Disabled

I - Insufficient Power (refer to "show power budget")

BD-CR1A.3 #

[Drew_C]

Hi George,
Can you send me the output of

code:

show slot

from one of your systems. The numbers can vary based on chassis model and type of MSM and I/O module.
From that, we'll see what we can get together for you.

Thanks!

[Drew_C]

Hi George,
Welcome to The Hub!

If you haven't already, take a look at Pages 5 and 6 of the BlackDiamond 8000 Series Datasheet. Backplane and slot capacity are listed there, if that is what you're looking for. There's also some additional capacity information on page 11. If you are looking for something else, let us know!

-Drew