Howto mirror a mlag in an EAPS ring

[JohanHendrikx]

I have an EAPS ring with x670-G2-48X switches. Connected at the core there is a MLAG configuration.

How can I mirror both links ?

[JohanHendrikx]

Stephen, I cann't create a remote mirror to an EAPS port.

[JohanHendrikx]

thanks for your advise

[StephenW]

I would probably use remote mirroring in the article i attached. It dumps the traffic into a mirror vlan you create. For the left switch you can use the below command.

configure mirror to port 5 remote-tag

[JohanHendrikx]

Hi Stephen,

Yes, I found this document too. Only….
When I create a mirror at the left switch, there is no vlan configured at the mirror port. According the document i have configure the vlan untagged to that port.