ingress rate-limit problem

[Tuomas_Rasku]

I'm having problem with access-list that i'm using for user ports ingress-limit. Sometimes access-list just seems to fail. User get IP-address, but no trafic will flood.

Only way to solve that problem is unconfigure access-list for that user port and put it back.

Meter that i use is:
create meter meter10M
configure meter meter10M committed-rate 11000 Kbps max-burst-size 500 Kb out-actions drop
And my policy-file:
entry policy {
if match all {
}
then {
permit;
meter meter10M ;
}}

How i use it under port:
configure access-list in_10M port 2 ingress
Does anyone have same problem? Or am i doing something wrong?
I have x460, x440, x430 switches and it's same problem with all of them.

[Jarek]

Hi,

could you explain your problem with details?
You have an ACL, then apply on port...etc...

--
Jarek

[Pa_Trick]

Hi Tuomas
Do get an solution of your Problems, because we have still the same Problem ?

[Tuomas_Rasku]

sh access-list usage acl-slice port 2:25

Ports 2:25-2:50
Stage: INGRESS
Slices: Used: 2 Available: 14
Slice 0 Rules: Used: 0 Available: 0
Slice 1 Rules: Used: 0 Available: 0
Slice 2 Rules: Used: 0 Available: 0
Slice 3 Rules: Used: 0 Available: 0
Slice 4 Rules: Used: 0 Available: 0
Slice 5 Rules: Used: 0 Available: 0
Slice 6 Rules: Used: 0 Available: 0
Slice 7 Rules: Used: 0 Available: 0
Slice 8 Rules: Used: 0 Available: 0
Slice 9 Rules: Used: 0 Available: 0
Slice 10 Rules: Used: 0 Available: 0
Slice 11 Rules: Used: 0 Available: 0
Slice 12 Rules: Used: 0 Available: 0
Slice 13 Rules: Used: 0 Available: 0
Slice 14 Rules: Used: 10 Available: 246 system
Slice 15 Rules: Used: 130 Available: 126 user/other
Stage: EGRESS
Slices: Used: 0 Available: 4
Slice 0 Rules: Used: 0 Available: 0
Slice 1 Rules: Used: 0 Available: 0
Slice 2 Rules: Used: 0 Available: 0
Slice 3 Rules: Used: 0 Available: 0
Stage: LOOKUP
Slices: Used: 1 Available: 3
Slice 0 Rules: Used: 0 Available: 0
Slice 1 Rules: Used: 0 Available: 0
Slice 2 Rules: Used: 0 Available: 0
Slice 3 Rules: Used: 31 Available: 481 system
Stage: EXTERNAL
Slices: Used: 0 Available: 0

[Drew_C]

Hi Tuomas,
Unless this has been resolved, the progression of this thread indicates sounds like it might be best to open a case with GTAC so that it can be tested.