Inter-VLAN Routing not working correctly

[IT-SA]

Hello!

I just took over a System Administrator role for a company and trying to figure out what happened to one of their VLANs.
I am new to the Extreme Network devices. They currently have 3 stacked X450-e as their main switch stack/router.
The previous SA setup a new VLAN (VLAN11) to free up some IPs on the main subnet.
Some PCs started dropping from the network last week and we ended up figuring out that the VLAN had been removed from the switch configuration.
I readded it and tried to set everything up as it should be but its not working and I am starting to bang my head against the wall and need some other eyes on this to tell me where the issue might be.

I've gone through all the help guides on here and cannot get a PC to ping another PC on VLAN11 from VLAN1. I cannot even get VLAN11 to pass DHCP to the PC. Static set IP doesn't work either.
DHCP server IP is 192.168.0.17

Here is my current switch config:

[Eric_Burke]

okay, how a bout a "sho fdb" and a "sho fdb port x:x" (big one to see general list, other to specifically see ports like 2:13 and 1:41. Should see MAC in proper VLAN for connected device(s).

[IT-SA]

1:41 is a port in a different office that is currently working. I've deleted it's DHCP entry and it was able to repull. I can also ping that PC from VLAN1.

[IT-SA]

Sorry, the first time I sent 2:13 I didn't have it setup for VLAN11. It was the port in my office that I was testing. I thought I had left it on VLAN11. I reconfigured it and sent the new info back to you.

[Eric_Burke]

In your first port comparison you sent 41 and 13, then said you had the wrong port. You resent 13 making me think that was the wrong one, but in the second example it had different vlan's. The first time it was not even on V11. Was 41 the working one or 2:13?

[IT-SA]

I really don't think so but you never know. I checked the security log on the switch and didn't see anything out of line. Just me and my coworker IPs showed up.