IP Address not visible in netlogin session

[Configterminal]

Why is the IP Address not visible in the netlogin session under the port command?  I found this article but it doesn't really explain what needs to be done to get this working.  I am indeed using policy mode.

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000087907

EXOS-SWITCH # show netlogin port 1
Port : 1
Authentication : 802.1x, mac-based
Port State : Enabled
Authentication Mode : Optional (Policy Enabled only)
Max Supported Users : 192 (Policy Enabled only)
Allowed Users : 128 (Policy Enabled only)
Current Users : 2 (Policy Enabled only)
------------------------------------------------
802.1x Port Configuration
------------------------------------------------
Quiet Period : 60
Supplicant Response Timeout : 30
Re-authentication : On
Re-authentication period : 3600
Max Re-authentications : 3
RADIUS server timeout : 30
------------------------------------------------
MAC Mode Port Configuration
------------------------------------------------
Re-authentication period : 3600
Re-authentication : Off
Authentication Delay : 0 seconds (Default)
------------------------------------------------
Netlogin Clients
------------------------------------------------

MAC IP address Authenticated Type ReAuth-Timer User
aa:bb:cc:e4:b5:2e 0.0.0.0 Yes, Radius MAC 0 AABBCCE4B52E
aa:bb:cc:39:1a:8a 0.0.0.0 Yes, Radius MAC 0 AABBCC391A8A
-----------------------------------------------
(B) - Client entry Blackholed in FDB

[Keith9]

Sorry to bring up an old post, but your post is a top hit on a Google search.  I'm also seeing the same thing but not on every switch.  I'll use this command to get a summary of connected hosts:
show netlogin dot1x detail | i host/

I have 3 switches configured for 802.1x with connectivity to 3 Windows NPS Radius servers.  The Radius is looking for a certificate which is autoenrolled on domain join.  This all works but only 1 of my 3 switches shows IP addresses, and two other switches just show 0.0.0.0 as the IP address.  The machines are authenticated sucessfully and are pingable.  I can even ping them by name on the switch itself, but when I re-run the command it still shows 0.0.0.0, so the ping did not "learn it" in the output of show netlogin dot1x detail.

All three switches are: 5520-48W  32.7.2.19 patch1-32.

About to roll this out to more switches so I'll see which ones are lucky enough to show the IP address or if my one switch stack is just a lucky oddball.