Why is the IP Address not visible in the netlogin session under the port command? I found this article but it doesn't really explain what needs to be done to get this working. I am indeed using policy mode.
https://extreme-networks.my.site.com/ExtrArticleDetail?an=000087907
EXOS-SWITCH # show netlogin port 1
Port : 1
Authentication : 802.1x, mac-based
Port State : Enabled
Authentication Mode : Optional (Policy Enabled only)
Max Supported Users : 192 (Policy Enabled only)
Allowed Users : 128 (Policy Enabled only)
Current Users : 2 (Policy Enabled only)
------------------------------------------------
802.1x Port Configuration
------------------------------------------------
Quiet Period : 60
Supplicant Response Timeout : 30
Re-authentication : On
Re-authentication period : 3600
Max Re-authentications : 3
RADIUS server timeout : 30
------------------------------------------------
MAC Mode Port Configuration
------------------------------------------------
Re-authentication period : 3600
Re-authentication : Off
Authentication Delay : 0 seconds (Default)
------------------------------------------------
Netlogin Clients
------------------------------------------------
MAC IP address Authenticated Type ReAuth-Timer User
aa:bb:cc:e4:b5:2e 0.0.0.0 Yes, Radius MAC 0 AABBCCE4B52E
aa:bb:cc:39:1a:8a 0.0.0.0 Yes, Radius MAC 0 AABBCC391A8A
-----------------------------------------------
(B) - Client entry Blackholed in FDB
