ExtremeSwitching (EXOS/Switch Engine) - Page 566 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Mirror with access to the probe

Hello, I'm searching a way to allow data on one client vlan on a mirroring destination port. This is for keep a distant remote session on the probe (for example, TSE, SSH or VNC session). Do you know if it's possible with Extreme Networks Summit ...

Accessing An ExtremeXOS Switch When Admin Credentials Are Unknown

Forgotten passwords happen - Here's a helpful guide on EXOS password recovery. It will work on EXOS 12.1 or greater. This procedure does not work for EXOS Summit switches with BootROM version 2.0.2.1 as the code:config none command is not present...

DHCP option 208

Hello, all! Does Extreme switches support dhcp-option code 208 (RFC 5071)? Thank you!

CNP vs CEP

I am trying to do a very simple setup. we have one provider connecting to our Carrier Ethernet Metro. provider is sending me with 3 VLAN which i usually take them inside one vman ( port is configured untag) and take it through our Metro. now what...

Black Diamond 8810 EXOS upgrade

Hello All, We wish to upgrade our Black Diamond 8810 Core switches from BootROM: 1.0.4.0 IMG: 15.3.1.4 v1531b4 to BootROM: 1.0.4.5 IMG: 15.5.4.2 v1554b2-patch1-5. Is this EXOS code going to be supported after an upgrade and/or do we need to go to a ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN