IPMC Warning on Stack Slot 1 in specific VLAN
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-06-2014 04:49 AM
Hello,
after I upgraded our whole Network Extreme components from 12.5.x to 15.3.1.4, I got the following IPMC Warning in the log and I don't know how to handle it:
"Date" "Time" Slot-1: Warning: received IGMPv1 query on vlan "VLAN_NAME" configured for IGMPv2 from "IP Address"
"Date" "Time" Slot-1: Previous message repeated 44 additional times in the last 7454 second(s)The strange thing is, that this message appears only on two Stacks in the DataCenter.
Anybody had/has the same problem and can help me to resolve/fix this message?
Thanks.
after I upgraded our whole Network Extreme components from 12.5.x to 15.3.1.4, I got the following IPMC Warning in the log and I don't know how to handle it:
"Date" "Time"
"Date" "Time"
Anybody had/has the same problem and can help me to resolve/fix this message?
Thanks.
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2015 01:27 PM
Did this ever get resolved? I am having similar issues.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2015 01:27 PM
Hi Nick, this error simply means that you have an IGMP mismatch between the sender of the IGMP packet (server/client) and the receiver (Switch). The versions must be compatible, or the switch must run a higher version than the client. So if the client is sending out IGMPv2, you can switch the Switch to either IGMPv2 or IGMPv3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-06-2014 05:58 AM
i just repalced the original IP Adress, the IP is from the main core... So i can easily turn off the igmpv2 (sorry was a typing error) on the main core or is it better to exclude the Log entry?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎10-06-2014 05:53 AM
Do wireshark capture and see from which source switch is receiving igmp v1 query. Turn it off . This message is just a warning included in 15.x we can also turn off warnings ... Log filter events exclude...
