ExtremeSwitching (EXOS/Switch Engine) - Page 154 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Normal Rx Power range for 10gb optics

Hello, Just put a new 3 switch stack of 5520’s in a site and I’m wondering if this one RX power is to be alarmed about. All ports below are 10gbps 850nm sm. See the one for port 2:59 has a * (star) next to RxPower. Is that bad? Indicative of just ...

Resolved! Error - The utilization of Host Entries hardware table on slot 1 has exceeded 90%

We see this error on our X440G2 stacks multiple times a day: <Noti:HAL.Card.L2L3HwTblThrshldExcd> The utilization of Host Entries hardware table on slot 1 has exceeded 90% It seem to correlate with very limited or no throughout on ports which have Wi...

Resolved! Time to live exceeded for a specific ip only

Hi All, Please help me to find out exact root cause of following caseI have recently install X440G2-48p-10G4 in our network with ExtremeXOS version 31.1.1.3 31.1.1.3-patch1-1 by release-manager, in fact all of our old switches are same model, configu...

Resolved! which is the procedure for password recovery in Switches X590?

Hello,I need the procedure for password recovery of X590 switches. Model X590-24X-1Q-2CThanks a lot

Resolved! Whats VOSS option when initializing new 5520 switches?

We are rolling out new 5520 switches at our locations and one of the questions you get when you first power on a new device prior to its initial configuration is Would you like to change the switch OS to VOSS? What is VOSS? What benefits does it hav...

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN