Issues stacking x440 and x460-G2. No connection on second switch

[jveronese]

I have an X440 and an X460-G2. They are connected in a Ring Topology and seem to be successfully stacked after following the guide on Extreme’s site. However, only the switch that is the master (currently my X440) has connection. If I plug a computer into a port on the X460-G2 I get no link lights and no network connectivity. If I make the X460 the master the connection works, but all devices plugged into the X440 lose their connections. I can see both switches from my master, but can’t log in to the non-master switch as it just sits at AAA-pending. The only thing I can think of is that the X460 is on Edge Advanced license while the X440 is on Edge. Any help would be greatly appreciated.

[Stefan_K_]

Is it even possible to stack X440(-G1) with X460-G2?

[Miguel-Angel_RO]

jveronese,

Please review the stacking steps.

Here the steps from my cheat sheet:

Mig

[jveronese]

Sorry, I’m new to stacking, so I do not know how to tell if it is STP or EAPS.

This is a rough drawing of what I have. Stacking port 1 on 440 is going to port 2 on the 460, with port 1 on the 460 going to port 2 on the 440.

[Miguel-Angel_RO]

jveronese,

Something i not clear.

Are they in stacking or ring (STP or EAPS)?

A topology drawing could hep to understand

Mig