L3 BGP MPLS and VPN don't work together
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
10-13-2014 12:04 PM
Summit X460.
Scheme:
X460-1 (loopback vlan) <-> (ospf+mpls+ldp)<->X460-2 (loopback vlan) <-> (ospf+mpls+ldp) <-> cisco 7301
All work fine beetween X460-1 and X460-2; X460-2 and Cisco
All routes is present, protocols working, labels is running, BUT when enable iBGP session beetween X460-2 and Cisco, there is no connection beetween X460-1 and Cisco.
Is there some nuances or ideas?
Than you!
Scheme:
X460-1 (loopback vlan) <-> (ospf+mpls+ldp)<->X460-2 (loopback vlan) <-> (ospf+mpls+ldp) <-> cisco 7301
All work fine beetween X460-1 and X460-2; X460-2 and Cisco
All routes is present, protocols working, labels is running, BUT when enable iBGP session beetween X460-2 and Cisco, there is no connection beetween X460-1 and Cisco.
Is there some nuances or ideas?
Than you!
22 REPLIES 22
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-24-2014 04:07 PM
Sure. Case number is 01066137. It ́s about BGP process crash on BD and also MPLS traffic not passing through BD when "enable iproute mpls-next-hop" is enable. All help is welcome.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-22-2014 11:10 AM
Can you please share the case number?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-20-2014 03:24 PM
I have tried these versions without success. Whenever I isse the command "enable iproute mpls-next-hop", I lose connectivity through BD. Through X670 this issue is not present. I´ve already opened a tech case for this.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
11-15-2014 08:28 AM
I have this running for a while with x670v and Cat6500. I'm running EXOS 15.3.1.
If you can afford some tests, I would try to set the BD8k to the latest 15.3.1 patch (p1-44 if I recall correctly) and see if it changes a thing.
What ever the result, please open a case.
If you can afford some tests, I would try to set the BD8k to the latest 15.3.1 patch (p1-44 if I recall correctly) and see if it changes a thing.
What ever the result, please open a case.
