Lag X460G2 CCR1009

[Bruno]

Hi, im having a issue while tring to bond 2 ports between a x460-g2 and a mikrotik ccr1009. My TX traffic get balanced but there is no way to balance RX.

I've tried using 802.3ad, L2, L3, L3_L4 and custom, with and without lacp, updated routerOS, but get no results.

This is

Config for X460G2 and CCR1009 as follow:

Thank you in advance 🙂

[Eric_Burke]

As an add-on to one of the other responses. I believe the method of sharing is to run the appropriate type of connection (L2, L3_L4, etc.) through a hashing algorithm and then divide that value by the number of ports in the LAG. The modulo (remainder) is used to select the port (0 being the first port, 1 being the second, etc.). Since the modulo is always 0 or "1 less" than the total number of ports (since you divided by that), it's a pretty easy decision to make. Mathematically, without enough source/dest. combos, you could see a pretty big difference between one or the other.

Eric

[Bruno]

Ops, one more thing. Is there a way to configure round robin on x460? if yes, then how?

[Bruno]

Thank you;

[Drew_C]

Round Robin is not supported.