ExtremeSwitching (EXOS/Switch Engine) - Page 376 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

IPv6 NTP woes

I am trying to enable NTP server over IPv6 from my Extreme BD-X8. I have assigned both IPv4/6 addresses to my vlans on the BD-X8 and I know the routing interfaces work for both IPv4 and IPv6 addresses. The clients use router addresses for the NTP...

Convert Cisco CLI to Extreme EXOS CLI

Hi all, May I ask does Extremenetworks provide convert tool to translate cisco CLI to Extreme CLI? Is someone could help me to translate it if no tools could help? Thanks in advance. access-list 103 permit ip any host 172.30.106.71 access-list 103 p...

How to check XOS lag/lacp port speed details?

In EOS we have different lag ports like lag.0.x so using lag port status we can check and identify that the attached port is in dormant state and the lag port speed as double if two link added in lag, while in XOS i can see the lacp is working or th...

Unmanaged switch loop prevention connected to 460-G2

So we have a bunch of 460-G2's we will be replacing some enterasys C2's. Currently SpanGuard on the C2's was not enabled hence when people with an unmanaged desk switch looped 2 of the ports all hell breaks loose with Spantree. The 460-G2's have STP...

EXOS: UPM Script - port number in log message

Today i play around with a UPM Script which refresh nodealias table after a port link down. # # Module upm configuration. # create upm profile clear-nodealias create log message Starting_Script_clear-nodealias clear nodealias port $EVENT.LOG_PARAM_0 ...

Top Kudoed Authors

User

Count

28

26

18

18

17

GTM-P2G8KFN