Lag X460G2 CCR1009

[Bruno]

Hi, im having a issue while tring to bond 2 ports between a x460-g2 and a mikrotik ccr1009. My TX traffic get balanced but there is no way to balance RX.

I've tried using 802.3ad, L2, L3, L3_L4 and custom, with and without lacp, updated routerOS, but get no results.

This is

Config for X460G2 and CCR1009 as follow:

Thank you in advance 🙂

[Bruno]

Hello, no, there is only 1 vlan on this port. the problem is, it is balancing nothing at all. its trowing like, 100mb on one port and 2kb on another. If it divide even 30-70 then it would be alright.

[Drew_C]

Great! Glad we could help!

[Bruno]

Thanks for your help. I just put in production and it worked. used the 2 of them as 802.ad3, x460g2 as custom LACD and CCR1009 as L3_L4. Dont know if was the routerOS update i did this morning or@Patrick Voss Guessing but it worked 😄

Thank you@Patrick Voss and@Drew C for your help and patience. Have a good day;

[Drew_C]

I think that's the problem, there's not enough variety to see traffic hash to a different port. Keep in mind that this isn't load balancing; it's load sharing 🙂

[Bruno]

Im going to test it with production connections, take it out of lab since the first guess of@Patrick Voss may be right. I'll come back after new tests to tell the results.@Drew C, my lag uses 2 ports and i did a test with a bandwidth simulation tool from winbox.