Most common EXOS show commands and config commands

[Airsail]

Hello Extreme Gurus, 

I'm coming from Aruba/Cisco envirement, and we've got to support a new customer with Full extreme switchings infra, 

Most of the time we stack to find the right command to troubleshooting different switching things, Thus I reached out here to have your help on getting a kind and necessary cmds that will help my team to troubleshoot and configure common switching stuff 

Thanks everyone. 

[EXTR_Paul]

someone already posted the CLI cross reference guide.

But the support portal is a great resource.   Tons of KB's on how to do simple things.

"How to configure LAG"

"How to configure SNMPv3"

"How to create a tagged port"   

Its all there,

[RonaldW]

I would take a look at the Command Line Interface Cross-Reference Guide. 

These have a number of commands also in relation with the Cisco commands. You can find it here:

https://documentation.extremenetworks.com/CLI_X-Ref/1.0/CLI_X-Ref_Guide_1.0.pdf?_ga=2.82004566.15471...

[DouglasF]

I came over from Cisco and had little trouble making the switch.   Read existing configuration files to get started, and download the documentation - both Concepts / User guide (name depends on firmware version) and Command Reference.    When dealing with older equipment, you have to consider whether newer firmware versions are supported on older hardware.   The details are here:  https://www.extremenetworks.com/support/compatibility-matrices/sw-release-extremexos-eos/

[CThompsonEXOS]

Below is a really good starting point:

https://extremeportal.force.com/ExtrArticleDetail?an=000079194

What are you generally troubleshooting in their environment (radius, STP, loops, layer 1, stacks, etc)?

Thanks,

Chris Thompson