I have a multiple VR sceanario where the routing is provided by an External Palo alto firewall.
BAsic ospf etc works a treat.
The RV point is within VR_default on the core and I have a stream coming from a vlan in VR servers , through 2 ospf connected point to point networks ( distribution to core to FW )
The 3 vlans are all configure for MOP , and the firewall automatically learnt the RV
When I look at the server switch I can see the multicast stream
Sh igmp snooping PSERVER 229.111.112.12 136.148.109.56 age 0
When I look at the P2P uplink I would expect to see some indication
Sh igmp snooping < uplink vlan >
The output is :223.0.0.5 sender 172.23.255.13 1 incomming stream Sender 172.23.255.13 ( which is the other end of the correct point to point link ( 172.23.255.14/30 )
So we are on the same switch looking a two different vlans with MOP configured , I would expect that my uplink vlan , should display the MCast stream 229.111,112,12 , and I should be able to trace it all the way through the interlinks to the firewall ..
What commands are suggested to further advance my issue
