Extreme Networks

Rod_Robertson · 01-11-2021

15 routes from IBGPAI am running BGP to JISC only , so why do I see this statement , sh iproute origin ibgpOri Destination Gateway Mtr Flags VLAN Duration#bi 136.148.8.0/23 0.0.0.0 0 UG-D--Bum--f- - ...

Rod_Robertson · 12-18-2020

I have a requiremment :The server vlans with a VR with enable forwarding configured, should not be able to communicate with each other, though as this is VR there are a number of P2p network through the infrastructure , to get this VR to the firewa...

Rod_Robertson · 10-06-2020

Current Cisco ConfigurationInterface FastEthernet0/1Description data & PhoneSwitchport access vlan 60switch mode accessswicthport voice vlan 888spanning tree portfast I have configured the extreme for voice to be tagged and data to be untagged.When t...

Rod_Robertson · 09-18-2020

Thsi is my first experiance with extreme Cloud IQ switch management.My question is, currently there is no internet connection , for a new installation, can I completely configure teh X590’s and multiple stacks , Ospf etc , and once internet access is...

Rod_Robertson · 10-23-2019

I have a multiple VR sceanario where the routing is provided by an External Palo alto firewall.BAsic ospf etc works a treat.The RV point is within VR_default on the core and I have a stream coming from a vlan in VR servers , through 2 ospf connected...

Rod_Robertson · 01-11-2021

Hi , thanks for all the advice , in teh end teh customer was moving to “ soft phone” so the issue with the polycom phones went away .. they were definatly both untagged so teh only way I could have supported this configuration was in effect changing ...

Rod_Robertson · 12-18-2020

Stefanoopps yest its a /24 … Thanks for the confirmation , I been doing extreme for a nunber of years , though in the clients I look after acl , like thsi do not normally come about hense the question, thanks for the prompt response..

Rod_Robertson · 10-19-2020

Gents the voice , and vocie 1 is a typo.. Sorry Current config of test port now 1:15Slot-2 WANDLE-EDGE-1.1 # show configuration | include 1:15 enable diffserv examination port 1:15configure qosprofile QP3 minbw 0 maxbw 100 ports 1:15configure qosprof...

Rod_Robertson · 10-17-2020

Hi went on site again today , and first tried Christophers suggestion, that does not work , the phone do not seem to understand Tag .. as If I connect as untagged in Voice then it all works as expected .So basaically the phones work , untagged … so a...

Rod_Robertson · 10-24-2019

Ports of interest , if port 25 drops , then I want too drop port 26and vice versa If port 25 comes up ( active and connected) then the UPM brings up port 26 ( BGP link to internet in my case) This worked  1.create upm profile MnLinkDnif ($EVENT.LOG...

Extreme Networks

User Statistics

User Activity

ibgp routes showing in the " Route Origin distribution at the end of the show IP route command..

ACL operation to stop client vlans routing to each other within a VR though still have access to P2pL inks and access to teh firewall

Convert csico switch voice and data configuration to Extreme X440-G2

Existing configured XOS X590 , being added to Extreme Cloud IQ will the configuration be removed ?

Multicast within a VR environment, where the RP is on another VR .

Re: Convert csico switch voice and data configuration to Extreme X440-G2

Re: ACL operation to stop client vlans routing to each other within a VR though still have access to P2pL inks and access to teh firewall

Re: Convert csico switch voice and data configuration to Extreme X440-G2

Re: Convert csico switch voice and data configuration to Extreme X440-G2

Re: Disabling a separate port when a specific port drops