Odd output of sh ipstats

[Jimmy_Sands]

System Type: X460-48t

Switch : 800538-00-05 1450N-xxxxx Rev 5.0 BootROM: 2.0.2.3 IMG: 15.5.2.9
PSU-1 : EDPS-300AB A-S9 800515-00-03 1450E-xxxxx
PSU-2 : EDPS-300AB A-00 800515-00-05 1549E-xxxxx

Image : ExtremeXOS version 15.5.2.9 v1552b9 by release-manager on Wed Jul 23 00:48:16 EDT 2014
BootROM : 2.0.2.3 Diagnostics : 6.3

Trying to solve a different issue I stumbled upon the output of sh ipstats, every single int had errors and discards, at almost the same amount. We are seeing no physical rx or tx issue on sw, so what would cause every single int to have errors/discards? Sw rebooted 7 days ago and I cleared counters last night.

IP Global Statistics
InReceives = 408019 InUnicast = 101240 InBcast = 189297
InMcast = 117482
InHdrErr = 2 Bad vers = 0 Bad chksum = 2
Short pkt = 0 Short hdr = 0
Bad hdrlen = 0 Bad length = 0
InDelivers = 293678 InDiscards = 0 Bad Proto = 0
OutRequest = 226817 OutDiscard = 0 OutNoRoute = 0
Forwards = 36516 ForwardOK = 36516 Fwd Err = 0
NoFwding = 0 Redirects = 0 No route = 0
Bad TTL = 0 Bad MC TTL = 12448
Bad IPdest = 0 Blackhole = 0 Output err = 0
MartianSrc = 0
FragCreate = 912 FragOKs = 233 FragFails = 0

Global ICMP Statistics
OutResp = 29045 OutError = 0 InBadcode = 0
InTooshort = 0 Bad chksum = 0 In Badlen = 0
echo reply In = 0 Out = 29045
destination unreachable In = 7 Out = 35714
- protocol unreachable In = 0 Out = 0
redirect In = 0 Out = 0
echo In = 29045 Out = 0
router advertisement In = 0 Out = 0
time exceeded In = 0 Out = 0

Global IGMP Statistics
Out Query = 5036 Out Report = 681 Out Leave = 0
In Query = 2556 In Report = 31350 In Leave = 3
In Error = 0

Router Interface ClassSvc

Stats: IN OUT
0 1176 packets
0 1176 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 37632 errors
0 37632 discards
0 unknown protos

Router Interface CoreSvc
i=
Stats: IN OUT
0 1568 packets
0 4014 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 50176 errors
0 242562 discards
0 unknown protos

Router Interface FacilitySvc
'
Stats: IN OUT
0 1176 packets
0 1677 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 37632 errors
0 63016 discards
0 unknown protos

Router Interface Loopback0

Stats: IN OUT
0 1568 packets
0 4013 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 50176 errors
0 242516 discards
0 unknown protos

Router Interface Manage

0 7388 packets
0 8327 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 497202 errors
0 600801 discards
0 unknown protos

Router Interface SsscSvc

Stats: IN OUT
0 2953 packets
0 1911 octets
0 0 Mcast pkts
0 0 Bcast pkts
0 199557 errors
0 99072 discards
0 unknown protos

[Jimmy_Sands]

Goooood catch, doing so now. ty

[Drew_C]

Hi Jimmy,
Yes - that's the only file you'll need unless you want to load the SSH module. The link to request the SSH files is in the same place in the eSupport site.

You may want to go with summitX-16.1.4.2-patch1-7.xos though. It's a more recent roll-up patch than the one mentioned above. It will also include the fix for the ipstats bug.

[Jimmy_Sands]

WOW, thank you...I had not noticed that. I was concerned the SNMP issue in 'X460 switch upgrade causing CPU spike for SNMP process'. So this should be fun!! Going to read the release notes and post any questions. ty

[Tripathy__Priya]

Looking at the above log for show ipstats seems Show ipstats missing inbound stats from ip forwarded interface in Exos 15.5.x versions. For a change can you please try upgrading this switch to the recommended release of EXOS16.1.3.6 latest patch. For more information please check if the below article can help you more:

https://gtacknowledge.extremenetworks.com/articles/Solution/Show-ipstats-missing-inbound-stats-in-15...