cancel
Showing results for 
Search instead for 
Did you mean: 

OSPF and MPLS route

OSPF and MPLS route

Yan_Naing_Kyaw
New Contributor
I have created OSPF,MPLS and VPLS in our switch. One of my core swith
iproute to our remote network. i found one path ospf route to remote netowrk but
the mpls show have tow path to remote netowk. You can see the below information.
I really appericate if someone help me to explain.

CORE_SWITCH.1 # show iproute 192.168.1.1/32
Ori Destination Gateway Mtr Flags VLAN Duration
mp 192.168.1.1/32 10.1.12.2 1 U--D---um-L-- CR1-CR2_782 0d:4h:13m:44s
mp 192.168.1.1/32 100.100.100.2 1 U--D---um-L-- CR1-CR2_902 0d:3h:33m:40s
#or 192.168.1.1/32 10.1.12.2 12 UG-D---um--f- CR1-CR2_782 0d:4h:13m:45s
1 REPLY 1

Erik_Auerswald
Contributor II
Hi,

only the OSPF route is installed in the forwarding table (as can be seen from the f flag, that is shown for the OSPF route only).

Thanks,
Erik
GTM-P2G8KFN